Online Shop

Best Value Vacs Vacuum Oven (392F Max Temp) This Vacuum Chamber utilizes an advanced PID temperature controller that will deliver consistent and accurate heat for your application. The ovens accuracy is +/- 1F. Temperature Stability, under vacuum, is within 3 degrees F for a operation in a room that is 77F. The absence of air molecules provides little heat conduction within the chamber which gives the user with the temperature stability they are trying to achieve.

This chamber features powder coated cold rolled steel interior, insulated outer housing, and one attached aluminum base shelf for this model.

This oven is vacuum tested for leaks and is put through a set of rigorous temperature ramps to verify temperature stability. Our controller is setup with presets that will reduce temperature overshoot and set a gradual ramp speed for the heating coils.

This oven comes ready to use and we conduct a 212F burnout

Features:

• Timer (1-9999) Mins.
• Over Temp. Alarm
• 2 Spare Fuses
• Tools to perform adjustments on the door when using the oven for
  high temp runs 212F +
• 1 Year Parts and Labor Warranty

Specifications:

• Capacity———————1452.6 cubic inches, (23.8 Liters)
• Temperature—————-Ambient+10f - 392f (Ambient – 392F)
• Exterior l x h x w———-23” x 17” x 18”
• Interior d x w x h———11.5 x 11.75 x 10.75

Certifications:

• ISO 9001: 2008
• ISO 13485: 2003.
• Manufactured in Accordance with Q/TIWY7-2004

Features:

• Power Consumption——400 Watts
• Voltage———————120 VAC 60hz
• Temp Stability————-+/- 1.0C
• Gasket———————-Silicone
• Window———————Tempered Glass
• Power Connection——-US Std. Plug
• Max Vacuum -29.9inHg (-1 Bar) -75.94cmHg -1MPa (-145PSI)
• Interior Material———-304 Stainless Steel
• Weight———————-72 lbs.

PLEASE CONTACT FOR SHIPPING

This is a complete vacuum chamber made by Best Value Vac’s. Simply screw the additional barb into your pump, attach the
hose and begin using your new high quality vacuum chamber. This chamber comes with a silicone gaskets designed only for our
systems. The gasket itself is reversible (doubling the life of our system guaranteed) allowing customers to instantly take it off
and flip it over. No adhesives are used! Our simple gasket design even allows you to place the lid on the chamber off center and
still pull a full vacuum. Which is a feature that most other chambers cannot do. Rated at a maximum temperature of 392F, our
gasket now allows us to have a system rating that allows a loss of no more than 2.5Hg (inches of Mercury) every 24 hours.

We are the number one provider in the market for vacuum chambers because of our great customer service, quick turnaround
time, safety and unbeatable warranty. We have a reputation of responding to all inquiries very fast and accurately. Our high
demand and volume allows us to be any price in the market, all while ensuring you always receive a superior product. You will
receive the best products available because all of our suppliers are ISO 9000 certified for quality control management and
because we take great pride in our vacuum chamber systems.

Kit Comes fully assembled and includes:
• (1) 1.5gl High Strength Stainless steel container
• (1) 1/2″ thick clear acrylic lid
• (1) Custom Industrial Grade Silicone gasket
• 100% Chemically resistant
• Gasket can withstand 390F max temp.
• 60A durometer density
• (1) Custom glycerin filled vacuum gauge
• Max vacuum -29.5inHg (+/-0.5inHg)
• (1) Leak free nickel plated air manifold
• Vacuum release valve and Vacuum Connect Valve
• (1) Brass barb that will connect to all vacuum pumps
• (1) 5ft clear steel reinforced vacuum hose
• (1) 8″x8″ FDA Grade Silicone Non Stick Pad
• (1) 50 Micron Air Filter

This is a complete BestValueVac® vacuum chamber setup designed built and 100% tested in Chicago, Illinois. With our unique patent pending gasket design (Utility Patent #14/533,548) this chamber is sure to last 10,000 uses with proper care and maintenance. The gasket itself is reversible (doubling the life of our system) allowing customers to instantly take it off and flip it over. No adhesives are used! Our simple gasket design even allows you to place the lid on the chamber somewhat off center and still pull a full vacuum. This is a feature that most other vacuum chambers do not offer. The maximum allowed temperature of this chamber is 160f. The components of this chamber are rated at higher temperatures however as a vacuum vessel we limit maximum operational temperature to 160f. Every chamber is tested prior to shipping to lose no more than 2.5Hg/24hrs.

This Kit Includes:
•(1) Soda lime triple tempered glass bowl
•(1) Industrial grade silicone gasket
-Gasket can withstand 390F max temp.
-60A durometer density
•(1) Glycerin filled vacuum gauge (must be regulated upon arrival)
-Max vacuum -29Hg (+/-.5Hg) at sea level
•(1) Leak free nickel plated air manifold
-Vacuum release valve and vacuum connect valve
•(1) 1/4 Female flare universal pump adapter for vacuum hose
•(1) 5ft clear steel reinforced vacuum hose
•(1) 8″x8″ Platinum cured silicone non stick VacPad®
•(1) 50 Micron air filter

Internal Dimensions:
6.75″ diameter at opening drafting down to 6″ X 3″ deep

Compatibility Explanation:
• BestValueVac® Chambers are not compatible with stabilization resin (i.e. Cactus Juice™, Gator Venom™, Minwax™ etc.), alcohol, ethanol, acetone and acrylic based monomers or polymers.The lid may only be cleaned with soapy water.
• ShatterVac® chambers are not compatible with stabilization resin (i.e. Cactus Juice™, Gator Venom™, Minwax™ etc.), acetone, acrylic based monomers or polymers. The lid may be cleaned with soapy water and low strength cleaning agents.
• GlassVac® chambers are compatible with all solvents and stabilization resins. We only recommend and warranty GlassVac® chambers for resin infusion and wood stabilization.The lid may be cleaned with any solvent or cleaning agent.
Additional Option Explanation:
• By choosing additional hose lengths you can make the hose that comes standard on your chamber either 10 or 15 feet in overall length.
• Optional additional VacPad® can be added to your chamber order with significant discounts.
• Tandem Kits allow you to purchase additional chambers and operate them on one vacuum chamber. For example, if you purchase two chambers with one vacuum pump you can operate all of these components at once with one tandem kit. The Tandem kit includes a 3 way hose splitter and 5 feet of hose.
• Bulk vacuum chamber purchases allow you to purchase 3 chambers at 5% off or 5 chambers at 10% off.

Pump Facts:
•We recommend the oil is changed every 50-75 of operating hours.
•CFM is a measure of cubic feet per minute.
•Single stage pumps reach a max vacuum of 50-75 microns (0=complete vacuum).
•Dual/Two stage pumps reach a max vacuum of 10-15 microns (0=complete vacuum).

Best Value Vacs Vacuum Oven (392F Max Temp)
This Vacuum Chamber utilizes an advanced PID temperature controller that will deliver consistent and accurate heat for your application. The ovens accuracy is +/- 1F. Temperature Stability, under vacuum, is within 3 degrees F for a operation in a room that is 77F. The absence of air molecules provides little heat conduction within the chamber which gives the user with the temperature stability they are trying to achieve.

This oven features a stainless steel interior, insulated outer housing, and two built in aluminum racks for this model.

This oven is vacuum tested for leaks and is put through a set of rigorous temperature ramps to verify temperature stability. Our controller is setup with presets that will reduce temperature overshoot and set a gradual ramp speed for the heating coils.

This oven comes ready to use and we conduct a 392f burnout.

Features:

• Timer (1-9999) Mins.
• Over Temp. Alarm
• 2 Spare Fuses

5 wall heating

• Tools to perform adjustments on the door when using the oven for
  high temp runs 212F +
• 1 Year Parts and Labor Warranty

Specifications:

• Capacity———————3232.9 cubic inches, (53 Liters)
• Temperature—————-Ambient+10F - 392F (Ambient – 392F)
• Exterior l x h x w———-28” x 22” x 18”
• Interior d x w x h———14.25 x 16.5 x 13.75

Certifications:

• ISO 9001: 2008
• ISO 13485: 2003.
• Manufactured in Accordance with Q/TIWY7-2004

Features:

• Power Consumption——1400 Watts
• Voltage———————120 VAC 60hz
• Temp Stability————-+/- 1.0C
• Gasket———————-Silicone
• Window———————Tempered Glass
• Power Connection——-US Std. Plug
• Max Vacuum -29.9inHg (-1 Bar) -75.94cmHg -1MPa (-145PSI)
• Interior Material———-304 Stainless Steel
• Weight———————-137 lbs

PLEASE CONTACT FOR SHIPPING

Electronics and assimilation lighting has been a topic of discussion and debate for quite some time. A perfect solution is now available.

The ePapillon offers many advantages over conventional luminaires. Quite simply, it uses the same amount energy to produce more light. This is achieved by combining a superior reflector (95% efficiency) with the brighter Double Ended 1000 watt EL lamp. Giving the ePapillon package the highest PAR output per watt.

The design of the reflector allows for easy removal, for cleaning and replacement.

The ePapillon uses a safety cover that provides a thermal buffer between the hot reflector material and any objects that it may come in contact with. The protective cover reduces the surface heat trom 390°F down to 160°F.

The Open Reflector Functionality directs more light to the canopy while trapping considerably less heat. Heat is allowed to rise away from the canopy more efficiently.

The heat that is generated on the lamp surface is not transferred directly to the plant, but indirectly, with air acting as a carrier. Using the open reflector concept, a natural air current is created, with which the heat is distributed evenly throughout the environment, thereby preventing the formation of hotspots on the plant. The Reflector allows heat to dissipate away trom the canopy, greatly reducing garden hotspots and increasing overall lamp life (less heat build up).

The higher density reflective material allows for regular cleaning.

Lights Interaction’s patented reflectors have a yield of 95% (measured in a Iabaratory certified by the British Standardisation lnstitute). The lux values achieved by luminaires with these reflectors are as much as 10% higher than by conventional luminaires resulting in more PAR light to the plant canopy.

Using a completely different production process, Lights Interaction is able to use a reflector material of a high surface density and a high reflection capacity. The reflector is designed to reduce the heating-up of the lamp to the minimum possible extent. As a result, there is a lower drop in the light output of the lamp in the course of its life.

In short, our reflector produces more light (light output of 95%- Light Output Ratio), a broader beam of growth light that penetrates deeper into the plant and lower lamp luminosity rate thanks to a relatively low reflector temperature.

These plant propagation trays are inexpensive, strong, plastic units, all measuring a standard 11” by 21” (28 cm x 53 cm). They all fit standard humidity covers including the 7” domes.

Closed Loop Reclamation Extraction System (Comes with 1 yr. Limited warranty) 150 Micron Mesh Blast tube Filter Nitrile Buna-N Gaskets are designed for Oil Processing Temp range -30-200F full set of extra gaskets including the 150 micron mesh gasket for the blast tube is included.

Key Features:

• 304 Stainless Steel Blast Tube 1lb (450g) *(Scale backwards to 60g)

Hardware not included for small scale

• 304 Stainless Steel Heavy Duty Ball Valves
• System Rated to 100PSI for blasting
• Multiple port connections for ¼” SAE 37 Degree
• 304 Stainless Steel Base Container 6″ diameter by 12″ tall
• Vacuum clamps at all interfaces make for a high pressure, easy clean unit.

Specifications: Dimensions (Inches): 25″ x 7″ Diameter overall size
Weight: 21 lbs.
Operating Temperature Range: 0C (32F) to 72C (160F)
Ultimate Vacuum: as low as 10 Microns
Base unit Maximum Capacity: 300 cubic inches, (2.553 Liters)
Construction: All components made of 304 Stainless Steel.
Intake Fittings: ¼” SAE 37 Degree Vacuum Fittings
Max Vacuum -29.9inHg
High Polish Interior base

PLEASE CONTACT FOR SHIPPING

Closed Loop Reclamation Extraction System (Comes with 1 yr. Limited warranty) 150 Micron Mesh Blast tube Filter Nitrile Buna-N Gaskets are designed for Oil Processing Temp range -30-200F full set of extra gaskets including the 150 micron mesh gasket for the blast tube is included.

Key Features:

• 304 Stainless Steel Blast Tube 2lb (1000g) *(Scale backwards to 60g)

Hardware not included for small scale

• 304 Stainless Steel Heavy Duty Ball Valves
• System Rated to 100PSI for blasting
• Multiple port connections for ¼” SAE 37 Degree/li>
• 304 Stainless Steel Base Container 10″ diameter by 10″ tall
• Vacuum clamps at all interfaces make for a high pressure, easy clean unit.

Specifications: Dimensions (Inches): 10″ x 6′ Diameter overall size
Weight: 50 lbs.
Operating Temperature Range: 0C (32F) to 72C (160F)
Ultimate Vacuum: as low as 10 Microns
Base unit Maximum Capacity: 728 cubic inches, (2.553 Liters)
Construction: All components made of 304 Stainless Steel.
Intake Fittings: ¼” SAE 37 Degree Vacuum Fittings
Max Vacuum -29.9inHg
High Polish Interior base

PLEASE CALL FOR SHIPPING

This is a complete BestValueVac® vacuum chamber setup designed built and 100% tested in Chicago, Illinois. With our unique patent pending gasket design (Utility Patent #14/533,548) this chamber is sure to last 10,000 uses with proper care and maintenance. The gasket itself is reversible (doubling the life of our system) allowing customers to instantly take it off and flip it over. No adhesives are used! Our simple gasket design even allows you to place the lid on the chamber somewhat off center and still pull a full vacuum. This is a feature that most other vacuum chambers do not offer. The maximum allowed temperature of this chamber is 160f. The components of this chamber are rated at higher temperatures however as a vacuum vessel we limit maximum operational temperature to 160f. Every chamber is tested prior to shipping to lose no more than 2.5Hg/24hrs.

This Kit Includes:
•(1) Soda lime triple tempered glass bowl
•(1) Industrial grade silicone gasket
-Gasket can withstand 390F max temp.
-60A durometer density
•(1) Glycerin filled vacuum gauge (must be regulated upon arrival)
-Max vacuum -29Hg (+/-.5Hg) at sea level
•(1) Leak free nickel plated air manifold
-Vacuum release valve and vacuum connect valve
•(1) 1/4 Female flare universal pump adapter for vacuum hose
•(1) 5ft clear steel reinforced vacuum hose
•(1) 8″x8″ Platinum cured silicone non stick VacPad®
•(1) 50 Micron air filter

Internal Dimensions:
9″ tall x 10″ in diameter

This is a complete BestValueVac® vacuum chamber setup designed built and 100% tested in Chicago, Illinois. With our unique patent pending gasket design (Utility Patent #14/533,548) this chamber is sure to last 10,000 uses with proper care and maintenance. The gasket itself is reversible (doubling the life of our system) allowing customers to instantly take it off and flip it over. No adhesives are used! Our simple gasket design even allows you to place the lid on the chamber somewhat off center and still pull a full vacuum. This is a feature that most other vacuum chambers do not offer. The maximum allowed temperature of this chamber is 160f. The components of this chamber are rated at higher temperatures however as a vacuum vessel we limit maximum operational temperature to 160f. Every chamber is tested prior to shipping to lose no more than 2.5Hg/24hrs.

This Kit Includes:
•(1) Soda lime triple tempered glass bowl
•(1) Industrial grade silicone gasket
-Gasket can withstand 390F max temp.
-60A durometer density
•(1) Glycerin filled vacuum gauge (must be regulated upon arrival)
-Max vacuum -29Hg (+/-.5Hg) at sea level
•(1) Leak free nickel plated air manifold
-Vacuum release valve and vacuum connect valve
•(1) 1/4 Female flare universal pump adapter for vacuum hose
•(1) 5ft clear steel reinforced vacuum hose
•(1) 8″x8″ Platinum cured silicone non stick VacPad®
•(1) 50 Micron air filter

Internal Dimensions:
9″ diameter at opening drafting down to 7″ diameter at the bottom. Internal height is 3″.

Compatibility Explanation:
• BestValueVac® Chambers are not compatible with stabilization resin (i.e. Cactus Juice™, Gator Venom™, Minwax™ etc.), alcohol, ethanol, acetone and acrylic based monomers or polymers.The lid may only be cleaned with soapy water.
• ShatterVac® chambers are not compatible with stabilization resin (i.e. Cactus Juice™, Gator Venom™, Minwax™ etc.), acetone, acrylic based monomers or polymers. The lid may be cleaned with soapy water and low strength cleaning agents.
• GlassVac® chambers are compatible with all solvents and stabilization resins. We only recommend and warranty GlassVac® chambers for resin infusion and wood stabilization.The lid may be cleaned with any solvent or cleaning agent.

Pump Facts:
•We recommend the oil is changed every 50-75 of operating hours.
•CFM is a measure of cubic feet per minute.
•Single stage pumps reach a max vacuum of 50-75 microns (0=complete vacuum).
•Dual/Two stage pumps reach a max vacuum of 10-15 microns (0=complete vacuum).

Bubble Magic extraction bags are made of extremely durable and distinct-looking black canvas. Each seam is double stitched with extra strong nylon thread. These bags have a unique extra level of micron screen along the lower layer. Each set comes in it’s own personal black carrying bag.

Includes:
- 220 micron bag
- 160 micron bag
- 120 micron bag
- 73 micron bag
- 25 micron bag

More efficient and affordable than anything else on the market, this 5 gallon extraction machine utilizes the most advanced technology in the extraction industry! Easy to use, durable, and portable, Bubble Magic Machines are super-efficient and feature a built-in drain and a 15 minute timer with 3 minute increments. Eliminate 90% of the work in the extraction process and save yourself time and money as these machines pay for themselves after just one use! Use them with our Bubble Magic Extraction bags to create the perfect finished product.

Included with each machine is (1) 220 Micron Zipper Washing Bag.

6′ clip on fan

Made in Denmark since 1969, horticultural stonewool is widely recognized as an ideal growing substrate. Each Grodan A-OK Starter Plug has a preformed hole to insure easy seed or cutting placement. Gardeners simply wait for plant roots to penetrate the bottom of each A-OK Starter Plug before transplanting them into a larger stonewool cube or block. Grodan stonewool is known for its quality, consistency and performance. This is a single sheet of 98 1.5″ plugs.

Grodan stonewool is known for its quality, consistency and performance. Each sheet of Grodan Stonewool A-OK Starter Plugs is perfectly sized to fit a standard flat and each plug has a preformed hole to easily plant seeds and cuttings. Once plants have rooted, gardeners can transfer individual A-OK Starter Plugs to larger pieces of stonewool or plant them directly in soil. For any growing application, stonewool offers speed, ease of use and cleanliness. This is a single sheet of 50 2″ square plugs.

Super silent with multi-level muffler

Special artificial rubber to keep a steady air flow output and pressure that can be adjusted freely (except single outlet)

Low power consumption

Perfect to run several Waterfarms or multiple air stones at once Electrical magnetic air compressor in a high quality aluminum alloy case, wear and tear resistant material for cylinder and piston

• High pressure and high output. Comes with multi-outlet divider (6, 8, and 12) that can be individually opened or shut
• 20w

Choose a pump that was built to go below the waterline! Active Aqua’s entire collection of pumps complete any grow setup, but for hydroponic systems, you can’t beat the submersible line. All of Active Aqua’s submersible pumps include multiple hose fittings so you get an exact fit every time. Each pump’s poweful mag drive construction includes removeable foam filters, impellers, rubber mounting feet to reduce vibration, and a 10-foot heavy duty power cord. Adjust the pump’s flow to get things moving at your preferred rate.

Features
•Indoor / outdoor use
•Oil free / environmentally safe
•UL-listed
•One year warranty