Online Shop

ADJUSTABLE SOCKET This incredibly unique design allows you to adjust the position of the socket both up and down and left and right to achieve optimum light reflectivity no matter what size bulb you use.
HINGED GLASS & STEEL CLAMPS Flip down glass makes this reflector a breeze to use, and the new rubber seal and steel locking clamps ensure a secure, air-tight close.
RETRACTABLE SUPPORT LINES This added safety feature helps prevent accidents and gives you more control during cleaning and bulb replacement.
REFLECTIVE ALUMINUM This reflector features highly reflective hammertone aluminum on all 4 side walls to maximize light efficiency.

The TRS21 is an Anti-Spark/Explosion pump designed and build specifically for R-600, Ignition Proof Construction meets ANSI/ISA 12:12.1
The pump can be used to recirculate the solvent through the system increasing speed of processing and yield, or just to reclaim the solvent to greatly increase recovery time to minutes.

Key Features:

• CPS TRS21 R-600 Recovery Pump, 2 Cylinder Oil-Less

Specifications: •Recovery Rates: Vapor- 2.5lb/min, Liquid-12lb/min
•Ignition Proof Construction ANSI/ISA 12:12.1
•Power : 115 VAC, 60 Hz, 10 Amps
•Power: 850 watts
•Filtration: Internal 100 mesh Screen integrated into Suction Port
Compressor Seals will require re-build after 200-240hrs of use)
Rebuild Kit: coming soon(rebuild time 20mins)
Weight : 24 LBS

This Fahrenheit Heat Pad will adhere to the bottom of the chamber with a peel and stick backing, It will come with simple standoff bumpers that will provide thermal separation from the work surface. The bumpers do not stick well to silicone but get the job done.

This heater is super accurate, and will hold a temp within a degree (depending on the environment and air movement)The heater includes full instructions to operate it and make PID controller changes. You can leave this heater on for months without any off time.The pad comes with thermal tape seen in the images above. This will be used with a thermal laser gun to shoot the temps. If you have a thermocouple that would be the best method to check and verify temps.

The controller has a temperature offset that will need to be found to set the controller accurately. Anything you attach a heat pad to will act like a heat sink. So the set temperature will be different from the actual inside temperature. However, our instructions tell you and provide the thermal labels to accurately find the offset and program the difference in. For example: If you set the 3 gallon chamber in the image above to 110F the actual temp on the bottom surface inside the chamber will read about 101F on the thermal label. (don’t move the gun around, thermal labels reflect lasers too) Since the inside is reading 101F and the controller is set to 110F your offset is 9F, soAdd 9 Degrees to the 110F setting (119F) and you will achieve your 110F on the inside surface of the chamber.

Specs:
UL Listed Fahrenheit Digital Controller.
Min Temp: Ambient + 5Max Temp: 160F
Voltage: 110VAC Only
Digital Control: Increments of 1 Degree.
Accuracy: +/- 0.2 Degrees
Units: Degrees Fahrenheit
Instructions: Fully included
Relay Lifespan: Approx. 10 million cycles
User can reprogram: Yes

For Maximum performance and pump efficiency,change the oil after every evacuation. After evacuation,oil contains contaminants which limit pump efficiency. JB Black Gold ultra premium vacuum pump oil can be used in any vacuum pump to maintain and prolong the life of the pump.

Drain immediately after evacuation while pump is warm. Slowly add oil to top of “oil level” line. If oil is to low, you will hear the exhaust baffle chatter. If oil level is too high,excess oil will be blown out of the exhaust.

Non detergent-Extra Pure-Hydroprocessed-ISO 400

Heavy 16 base nutrient is an artisan blend featuring all of the essential elements that plants require to produce maximum yields of unsurpassed quality.

Heavy 16 features:

Chelated micronutrients for maximum absorption

4 forms of Calcium for cascading nutrition delivery

3 forms of Nitrogen for immediate & extended release

Available in 1L 4L 10L and 23L

T5 fixtures can be hung and operated vertically or horizontally and daisy chained together so you can configure them to best fit your grow room design. Each fixture is made with imported high reflective European aluminum

VHO light bulbs are 7,500 lumens each

High-quality 1/4” black Vinyl Tubing for various hydroponics applications. 100 feet per roll.

Voodoo Juice increases root mass by making them denser and more branched

Available in 500mL, 1L, and 4L

This is a quality oscillating fan with many uses, including duty in a hydroponic system.

Only wall fan available at the moment.
Oscillating wall fan
40cm/16″ diameter
50 watt
240 Volts
50 Hz
high power
3 speed pull-cord control
SAA approved #A/11670EA
1 year warranty

WHIP IT Fuel 320ml 9x Refined Butane Fuel, 9x Butane

Available by the Can, in a mini case(12 cans), and a master case (96 cans)

<

Increased co2
The benefits of increased carbon dioxide levels within a greenhouse are widely accepted and understood, and include earlier flowering, higher yields, improved stem strength, and larger flowers.

No set up or maintenance
EZ CO2 is far less costly than tanks and generators and is incredibly simple to use. Just place it and leave it! It’s that simple. You’ll reap the benefits of increased CO2 PPM without any of the work or hassle of the other methods.

MEDIUM = MORE CO2
We’ve increased the amount of medium in our bags, compared to others on the market, so you get more CO2 for your money.

Simple and uncomplicated
EZ CO2 gives off no odors or heat, and is completely self-sustained. It’s already giving off CO2 the moment you buy it, and it continues to produce CO2 for the next 6-8 months.

ABOUT
EZ CO2 is a natural, safe, and inexpensive way of providing your plants with carbon dioxide (CO2). CO2 tanks and generators can be expensive and time consuming, but EZ CO2 requires no set up or maintenance and is easy on your budget!

WHY ADD CO2?
The benefits of increased CO2 levels within a greenhouse are widely accepted and understood, and often include earlier flowering, higher yields, improved stem strength, and larger flower size. This is because plants use the process of photosynthesis to convert water, sunlight, and CO2 into sugars and other materials essential to their growth and overall nutrition. When there is more CO2 in the air, plants become more efficient at absorbing it and processing it. Faster conversion of CO2 into sugars and nutrients results in faster plant growth. Additionally, plants take in CO2 through small pores on the underside of their leaves called stomata. When the levels of CO2 are higher, the plants do not need to open up these pores as often or as wide, resulting in less water loss and reduced likelihood of taking in damaging air pollutants.

HOW DOES EZ CO2 WORK?
EZ CO2 houses a non-fruiting mycelial mass (fungus) and enough organic matter to sustain it for approximately 6-8 months. The fungus works opposite a normal plant: it breathes in oxygen and breathes out carbon dioxide (released 24 hours a day through the breather patch on the bag), essentially creating a natural, self-sustained, inexpensive CO2 generator. EZ CO2 is odor-free, produces no heat, and is already giving off CO2 as soon as you purchase it, there’s nothing to turn on or set up. Simply place the bag in your greenhouse and then leave it alone!

INSTRUCTIONS
After purchasing EZ CO2, place it in your growing area (1 EZ CO2 bag is recommended per 4′ x 4′ area) slightly above plant height. CO2 is heavier than oxygen, and will fall downward onto the plants. That’s it! There’s no need to refill anything or make any adjustments. DO NOT REMOVE THE BREATHER PATCH ON THE BAG OR OPEN/PUNCTURE THE BAG IN ANY WAY.
After approximately 6-8 months the CO2 production will gradually decrease, and your EZ CO2 will need to be replaced. When you are ready to dispose of your EZ CO2, you may open the bag and dispose of the contents in your compost pile or mix it with soil, and the plastic bag can be recycled.

FAQS

Is it normal for the contents of the bag to change color or the bag to inflate?
Yes. The bags will often start out brown and, over time, will turn a white-ish color. This is normal. It is the natural development of the mycelial mass. The EZ CO2 bag may also inflate, depending on the conditions it is in. This is also normal.

Do I need to open or remove the patch on the bag?
NO. EZ CO2 is actively working the moment you purchase it. The bag should not be opened or the white Breather Patch on the front removed until disposal. Doing so will contaminate the mycelial mass and stop the production of CO2.

What is the white patch on the front of the bag?
That is the Breather Patch. This perfectly sized patch allows oxygen to enter the bag and CO2 to exit while still protecting the mycelial mass from outside contaminants. Do not remove the Breather Patch.

Where should EZ CO2 go?
1 EZ CO2 bag is recommended per 4′ x 4′ area of grow space. Position the bag in your grow room over your plants, above plant height (CO2 will fall downward). Make sure that if you are hanging EZ CO2 over your plants you do not puncture the bag. It must remain sealed to protect the mycelial mass.

When should I use EZ CO2?
EZ CO2 can and should be used throughout all stages of plant growth.

How big is each EZ CO2 bag?
Each bag measures about 10′ x 5′ x 15.5′